Site Information

 Loading... Please wait...
  • Image 1
  • Image 2

FOA-SPARK Brush DC Motor Controller

$55.00
SKU:
FOA-SPARK
Weight:
1.00 LBS
Shipping:
Calculated at checkout
Current Stock:
27
Quantity:

Product Description

SPARK Electronic Speed Controller

 

FOA has been looking for a reliable ESC with high peak amperage capabilities required for large vehicle in 1/6th scale. We tested the SPARK ESC and found that it allows 24V input with no over-heating of the device

The Spark features 60A continuous current with passive cooling, bi-directional limit switch inputs for smart mechanism control, an RGB LED status indicator, and a button-activated brake/coast mode.

  • FEATURES

    • Passive cooling
      • No fans required
    • Synchronous rectification
      • Reduces heat generation
    • Limit switch inputs
      • Stops forward and/or reverse motion automatically
      • No programming required
      • Compatible with normally open (NO) limit switches
    • Calibration
      • Factory calibrated to 1ms – 2ms input signal
      • User calibratable
    • Integrated cable retention for PWM port
    • Clamping screw terminals
      • Better contact area and retention
    • RGB status LED
      • Detailed mode and operation feedback

    SPECIFICATIONS

    • Input Voltage (nominal): 12V-24V
    • Continuous Current: 60A
    • Peak Current (2 second surge): 100A
    • Input Pulse Width Range (nominal): 1ms – 2ms
    • Input Resolution: 1μs
    • Input Deadband: 40μs
    • Output Frequency: 15.625kHz
    • Output Voltage Range: 0V – ±Vin
    • Maximum Output Voltage Resolution: 0.001xVin
    • Dimensions: 2.860″ x 1.875″ x 0.868″
    • Weight: 74g/2.61oz

    KIT CONTENTS

    1 – SPARK Motor Controller
    1 – PWM Cable – 36″ – 22 AWG
    2 – Extra terminal screws – M3

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category