FOA-TTES2 Combat R/C Gun Elevation System, 2nd Generation

Product Description

TTESPaintball Marker Elevation System

[Patent Pending]

Non-assembledGun Elevation System for scale vehicles [i.e. 1/6 scale or larger]. This unit is designed as a lead-screw system. The motor is small enough to stall without the need of limit switches on maximum or minimum elevations.

This self-standing Gun Elevation System consists of laser-cut steel brackets mounting a lead-screw mechanism to allow for fine tuning of the upward and downward movement of the side arm.

Floor print of unit: 7 cm width (2.75") by 24 cm length (9.4"). The height of this unit from center of rotation to base plate is 4.7 cm (1.85")

Includes:

Metal Connector Bracket attaching from mantlet to TTES arms
12-gauge TTES arms (2)

Advantages:

Elevation Movement: The TTES2 is designed for 12 degrees upward elevation, and 10 degrees downward elevation (depending on the height of the ceiling over the motor)
Powerful:TTES2 is designed for mounting a Paintball Marker of up to 8 lbs. The motor is High Torque 150 RPM @ 24 VDC.
Flexible:The mounting plate allows the user to mount the TTES on a plywood or Metal base.

Contract FOA to Build and Test the TTES for you! (Click Here)

Howto build the TTES System