Site Information

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

FOA001RC-IDLER1 Two Idler for RC Panzer IV Standard

5.00 LBS
Calculated at checkout
Current Stock:

Product Description

RC Panzer IV - Standard Idler



  • Two Resin wheels
  • Two bushings 1/2" ID

Masters for the wheels were done in 3D print to achieve a perfect balance with the bushings and the wheels.

The idler wheel is made for the MPSS Suspension System 1/2" shaft. A 3/8" bolt inside an 1/2" sleeve is inserted in the bushing, between aluminum spacers and a washer/bolt to lock it in place. The hub cap goes over it.

FOA recommends:

  • Drill through the resin on the back-side of the idler's arms and insert self-tapping screws to make sure the idler does not separate during operation.
  • Before gluing/screwing both idler wheels together, insert the bushings and put the 1/2" sleeve through BOTH bushings. It will allow the wheel to be perfectly balanced.


FOA will offer a "late idler" for the Panzer IV Ausf.J "late"

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category