Site Information

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

FOA011HVSSRC Field of Armor Models 1/6 M4A3 HVSS Sherman Un-Assembled R/C Kit - Reserve Pricing

$1.00
SKU:
FOA011HVSSRC
Weight:
100.00 LBS
Shipping:
Calculated at checkout
Quantity:
Expected release date is Dec 15th 2019

Product Description

Note to Customer: This product is placed on reserve in August 2019. It's MSRP is $3,600. When the system has enough reserve, FOA will contact the customer about pricing and timing of delivery

Includes Dragon 1/6 scale Sherman M4A3 (75) or (105)

FOA T80 tracks: the end connectors/track guides are now made of die-cast aluminum and the inner skeleton of the pad has stamped steel plates. The e-clips for each track pin.

Products that are NOT in stock but still available for purchase means that FOA can to source the laser-cut parts within 2 weeks of your purchase

 

This kit is a "Combat RC" tank, using the plastic frame of Dragon 75046 M4A3 Sherman kit, and adding a laser-cut inner metal frame to add structural strength.

Item dimensions:
Weight: 54 kg/120 lbs.
Length: 105 cm/41 in.
Width: 43 cm/17 in.
Height: 45 cm/18 in.

 

The kit includes the following components: Dragon 75051 plastic kit.

  • TTMS Motorization System, Low Profile, TTMS is a "self-standing frame" which improves the structural strength of the body, and has high torque to turn in grass and rough terrain - Test speeds have shown up to 4.3 mph (6.9 km/hr) on flat surfaces.

  • TTRS turret rotation system with its standard Lazy Susan / ABS rings and high torque motor. The rotation speed is around 12 sec for 360 degrees, or 5 rpm - accurate for the scale tank.

  • Track system is made with "hard rubber" pads with inner metal brackets, and die-cast aluminum end-connectors with steel pins and e-clips - metal in-connectors between pins are cast inside the rubber pad to avoid stretching of the pad (see pictures below)

  • HVSS (Horizontal Volute Suspension System) in heavy gauge steel. It uses coil springs rather than volute springs, but works the same way. The plastic parts cover the metal inner frames, allowing visual accuracy.

  • All bushings, rails, springs, bolts and steel sleeves associated with the running gears, VVSS suspension, idlers and sprockets

  • Electronic Control System: Speed controllers for the two motors, and the turret rotation. Emergency switch on the back panel. All wiring necessary and fuse box.

 

This product can be purchased affordably in EIGHT sub-systems:

  1. T80 tracks with rubber pads
  2. Inner Metal Shell
  3. Boogie System including Idler, and 24 rubber filled Road Wheels
  4. RC Drive Sprocket
  5. TTMS-LP Motorization
  6. TTRS 12" Turret Rotation
  7. Dual Control System (Turret Rotation/Gun Elevation)

 

The two 12 VDC UB12180 type 18Ah Lead Acid Batteries (or Four 5000mA Lipo batteries) or RC Radio/Receiver not included.

 
   
   
   
   

 

Please check FOA FB-Build Page for more information and hints

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category