Site Information

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

FOA014RC-MPSS Combat R/C Suspension System for Kingtiger Tank

24.00 LBS
Calculated at checkout
Current Stock:

Product Description

MPSS Suspension System

Designed for FOA014 Kingtiger Tank

[Patent# US9,333,436 B2]

Non-assembled Suspension Unit for the FOA014 Kingtiger Static Kit. This suspension system is two rows of Nine swing arms designed for a maximum load of up to 150 kg (340 lbs.)

Each self-standing suspension unit consists of a road wheel shaft, connected to a layered swing arm, which is connected to the swing arm shaft with an adjustable tension coil spring. Each suspension unit is rotating inside a steel square tube rail.

Adjustable:Two adjustments are possible on this suspension unit: The coarse adjustment is made on the position of the hex bolt in the swing arm wrap-around plate. The fine adjustment is made inside the hull, on the half-moon groove connected to the coil spring tangential arm


What do you need to do?

  • Drill 5/8" holes on the side of the Tiger I hull, corresponding exactly to the holes of the rails. You might drill larger holes to allow the flange of the bushings to be flush with the ABS
  • Drill 1/4" holes on the side and bottom of the Tiger I hull, corresponding exactly to the 1/4" holes on the rails. These holes are for securing the rails to the hull. The side holes, next to each 5/8" holes, are the suspension arm stoppers.

NOTE: Idler small swing arm for track tension is not included in this system

(Click on image to view larger photo.)

How to build the MPSS System

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category